Plastic panels provide a high quality low cost solution for access to building services in ceilings and walls. Primarily used in domestic situations for access to rodding eyes and stop cocks the panels are very easy to fit. The narrow 20mm profile produces a lightweight solution that can be used in all types of wall or ceiling construction. The panels are manufactured in the UK from UV stabilised ABS with a lightly textured surface that will not discolour.

Fitted using proprietary building adhesives or screws the hinged removable door snaps into place and has a positive quality action.

Open with a screwdriver or coin in the visible slot opposite the hinge edge or use the key where the optional key lock has been specified.

As a repair panel to cover a hole in the back of a kitchen cupboard for access to a stop tap or as a visible designed detail to a rodding eye the panel finishes the access point professionally and economically.

Technical & Fitting Details

Door tray & frame – Moulded in UV stabilised ABS with a 25 mm wide picture frame surround in white equating to RAL 9010

Hinge & Locking mechanism – Pivot hinges moulded into the door with corresponding locating slots to the frame. Using standard closing method the door clips shut. Optional key lock available for certain sizes.

Preparation – Prepare a clear trimmed opening in the structure 2mm larger than the panel ordered.

Fitting - Using a suitable propriety adhesive apply to frame or wall and press into place. Alternatively screw fix as appropriate. The panel is sufficiently lightweight that the door does not need to be removed from the frame during fitting.

Operation - Use screwdriver or coin to prise the door open. The door can be removed from the frame for full aperture access. To replace the door bend slightly to ease the hinge pivots into their slots.

Availability – From stock individually or in boxes of 10.
Bar-coded for merchant resale.